Click image to view full size image
SFSP668 Tear Circle Wide Hammer Mill Grinder Machine
Performance Parameter
| Model
| Dia. of Rotor | Width of Grinding Chamber (mm) | Speed of Rotor(r/min) | Speed of Beater (m/s) | No. of Beater (pc) | Power | Aspiration (m³/min) | Output | |
| Coarse | Fine | ||||||||
| SFSP668- | 660 | 380 | 2970 | 94 | 56 | 22/30 | 30 | 34 | 5-6 |
| SFSP668- | 660 | 450 | 2970 | 94 | 64 | 45/55 | 40 | 45 | 7-12 |
| SFSP668- | 660 | 600 | 2970 | 94 | 88 | 55/75 | 48 | 53 | 10-15 |
| SFSP668- | 660 | 750 | 2970 | 94 | 112 | 90/110 | 60 | 66 | 15-20 |
Re: The above indices are those when meeting the following conditions: raw material: corn, moisture content not higher than 14%, density not lower than 0.72t/m3, screen: hole diameter 3mm, hole-opening rate not less than 33%.
Product Feature
1.SFSP668 Tear Circle Wide Hammer Millis used for grinding raw materials by large and medium livestock and aqua feed mills. It can also be used for grass and pharmacy fine grinding. The granular raw materials, such as corn, sorghum, wheat, beans, etc can be grinded;
2.SFSP668 Tear Circle Wide Hammer Millis derived from tear circle type hammer mill and efficiency can be improved by 45%-90% comparing to universal hammer mill;
3.SFSP668 Tear Circle Wide Hammer Millcan produce qualified aqua feed under full load with 0.8, 1 screen and reduce jam significantly. Both coarse and fine grinding can be realized without changing screens;
4.The
SFSP668 Tear Circle Wide Hammer Mill Grinder Machine
